All steel construction door for use in high-temperature applications.
- All-Steel Construction Door
- For use in high-temperature applications
“No-slam” latch designed to protect against shock to room instrumentation
- Single or double leaf
SpecificationsSupply where indicated on plans Jamison Double Leaf Smokehouse Door, all steel construction.
Door panel to be constructed of #12 gauge steel pans, front and back, welded together. Door leaves to be insulated with 2" of fiber glass and provided with internal bracing for hardware attachment and structural integrity. Door to be painted after assembly.
Frame to be constructed of 3" x 3" x 3/8" angle for high (step up type) sill and furnished with ears or anchors for attachment to wall. (ARCHITECTTO SPECIFY EARS OR ANCHORS - Ears for bolting frame to existing masonry wall or anchors for erecting frame in new masonry wall.) Complete unit to be painted after fabrication.
Gasket to be rectangular, closed cell, heat resistant rubber. Galvanized adjustable sealing bars, #14 gauge, to be provided at sides and head offrame for maximum smoke-tight continous seal. Heat resistant gasket to be provided between sealing bar and frame.
Hardware to consist of multipoint interconnected "wedging" fastener with inside release handle and steel strap hinges. All hardware to have hot dipped galvanized finish and bolted to steel reinforcement welded to back of front pan.
Architectural Data Sheets
- Door leaf over 4' wide or 10' high to be insulated with 3" of fiber glass and larger angle frame required.
- If doors are to be used where steam or excessive moisture conditions prevail such as "Low Pressure" cookers, etc., add to specifications - doors to be hermetically sealed.