Have a specific need for the Beverage or Food Industry? Contact us with your requirements to start a conversation.
Contact Us Today!
Jamison Door Company has captured 100 years of door making experience and artistry in this beautifully-hand crafted limited edition door. Made with genuine ¾” thick oak lumber and bronze finished hardware, this signature door replicates early 1900s door design in classic Art Deco style.
The latch and hinges are the authentic Jamison originals. There is no better choice if looking for something beautiful, unique, and high quality.
Model AC is HCR’s basic unit — Horizontal, Curvilinear, and Recirculatory. Its air stream produces counter-flow forces equal and opposite to the two-way flow-through forces caused by air temperature differences.
The Model 3CAV is primarily used between rooms with extreme temperature differences and very high traffic. The frost elimination cycle is similar to the Model DCAV but the additional vestibule improves efficiency as well as increases the model’s temperature range applicability.
The Model 3CAV automatically adjusts as conditions change to optimize performance and reduce energy consumption. With the use of HCR sensors and software, Model 3CAV can be integrated into a facility’s refrigeration control and monitoring system. This allows both remote monitoring and remote adjusting of the HCR equipment.
Manually operated UL 3 hour rated single leaf horizontal sliding cooler and freezer fire doors.
Power operation can be added and comes with a letter of compliance since the door has only been tested as manual.
Versatile Low-Cost, See-Through Door For Many Openings Where Better Control of Temperature, Dust, Fumes, Noise or Air Flow is Needed
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
DynamicRoll® PE (polyethylene) high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Designed for heavy washdown.
Swinging see-thru plastic cooler door. Door panel to be constructed of 1" thick clear, transparent cast acrylic, Type #1 Grade A in accordance with Federal Specification L-P-391C. Bottom of door to be protected on front and back with #16 gauge stainless steel toe plates. Frame to be metal clad on all exposed surfaces with #24 gauge stainless steel...
'Tuf' and Beautiful. The Jamotuf® product line is the perfect combination of form and function.
Doors offer the sleek, efficient, rugged design that is sometimes a major consideration when selecting the perfect door. The molded plastic door provides a clean and modern appearance, with white color as the standard and optional colors available.
Jamison’s most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panels and face frames are woodless.
Jamison’s most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panels and face casings are woodless.
A favorite of industry experts, Jamison’s Overhead Sliders are extremely versatile with design configurations for virtually any application.
Jamison’s most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry. Our standard door panel and face casing are woodless.
Jamison’s most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry. Our standard door panels and face casings are woodless.
The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components.
The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components.
A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.
With a Powertron® DS Operator, the Food Pro® opens a 40” single-leaf door in just one second. A double-leaf door opens 80” a second. Its incredibly smooth and quiet operation is unmatched in the industry.
Our standard door panels and face casings are woodless.
A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.
A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.
Frigo2 Freezer high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
At the heart of the Frigo2 is our innovative double curtain low energy cost design. When closed the two curtains create a dead air space which is then treated with a small amount of heated air. This allows the curtains to remain frost free at the lowest energy expense. It also allows it to be either warm side or cold side mounted.
If the door curtains come out of their guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Metal clad single or double leaf swing doors.
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
The Model ECAV consists of two fast-acting strip doors that create a vestibule for conditioning air and an electrically or hot-gas heated anti-frost air-conditioning (AFC) section with automatic temperature control.
The ECAV is designed for medium to light-traffic freezers and high humidity situations.
The basic NPAC model is made to counteract the one-way flow-through forces caused by negative building pressure or by wind effects.
The Model DCAV uses two recirculatory air curtains, creating an air vestibule between the two air streams where the air is captured and treated to a non-frost, non-fog state.
The Model DCAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model DCAV can be integrated into a facility’s refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
A conditioned air vestibule that uses a push-to-open versus a motorized opening.
U.S. Pat. No. 10,921,049 and Patents Pending
Miniature/small version of CAC for conveyors.
The temperature differences at conveyor openings, if unprotected, are subject to the same problems as regular doorways. Prevent air infiltration and frost and ice buildup by installing HCR equipment designed to work seamlessly with your conveyor system.
The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door.
It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control, to regulate the amount of air and heat required.
Plyfoam® Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of sizes, styles, and options.
The Plyfoam®II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
Plyfoam®II Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of styles and options.
The Plyfoam® II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
The Plyfoam® II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
The Plyfoam® II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
Smart Automatic Cooler and Freezer Doors bring down operating costs by making the doors ‘smarter’. Tests have shown that by the use of the Smart Controller, doorways are no longer being left open by employees thus enabling maximum energy savings, reduced infiltration, and improved productivity.
The strategic alliance between Tucker Auto-Mation, Boss Controls, and Jamison Door increases energy savings by equipping the sliding doors with microwave motion sensors, time delays, and / or Infrared presence sensors so the doors know when to open and when to close, hands free! Additional features include surveillance cameras and People Counting Systems.
The ThermicRoll coiling door is a state-of-the-art door guaranteeing the best performance in terms of speed, safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments.
The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.
Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or perforated for ventilation.
The ThermicRoll coiling door is a state-of-the-art door guaranteeing the best performance in terms of speed, safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments. The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.
Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or perforated for ventilation.
The Model CAC Air Curtain is for applications where temperatures and humidity exceed the limits of our Model AC. A heater unit is added to condition the air as it mixes inside the vestibule.
The Model CAC automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model CAC can be integrated into a facility’s refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
Designed specifically for the needs of the retail industry.
A small conditioned air vestibule with touch opening capability.
