Food & Beverage

The Model 3CAV is primarily used between rooms with extreme temperature differences and very high traffic.

The frost elimination cycle is similar to the Model DCAV but the additional vestibule improves efficiency as well as increases the model's temperature range applicability. 

The Model 3CAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.

With the use of HCR sensors and software, Model 3CAV can be integrated into a facility's refrigeration control and monitoring system.  This allows both remote monitoring and remote adjusting of the HCR equipment.

Model AC is HCR's basic unit -- Horizontal, Curvilinear, and Recirculatory. Its air stream produces counter-flow forces equal and opposite to the two-way flow-through forces caused by air temperature differences.

The Model ASSD is a swift opening and closing motorized strip-door.  Strip-door operation is easily adjusted to suit traffic speed. 

Metal clad or all steel single or double leaf door.

Metal clad single or double leaf swing doors

Versatile Low-Cost, See-Through Door For Many Openings Where Better Control of Temperature, Dust, Fumes, Noise or Air Flow is Needed

DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.

If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.

Frigo2 Freezer high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.

At the heart of the Frigo2 is our innovative double curtain low energy cost design.  When closed the two curtains create a dead air space which is then treated with a small amount of heated air.  This allows the curtains to remain frost free at the lowest energy expense. It also allows it to be either warm side or cold side mounted.

If the door curtains come out of their guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.

DynamicRoll® PE (polyethylene) high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.

If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.

Designed for heavy washdown.

DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.

If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.

DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.

If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.

Manually operated UL 3 hour rated single leaf horizontal sliding cooler and freezer fire doors.

Power operation can be added and comes with a letter of compliance since the door has only been tested as manual.

By combining an air door with your currently installed door, you are assuring an efficient air block when your hard door is open, reducing cold air loss and decreasing the problems associated with high-traffic openings, such as ice and safety concerns.

Achieve the next level of efficiency by adding an HCR Model AC or CAC to your existing door. Perfect for high-traffic doorways where ice and infiltration are a challenge, an HCR Air Door provides another layer of protection to assure that the opening remains accessible for workflow, yet closed for costly air infiltration and energy efficiency.

'Tuf' and Beautiful.  The Jamotuf^® product line is the perfect combination of form and function.  

Swinging see-thru plastic cooler door.

'Tuf' and Beautiful.  The Jamotuf^® product line is the perfect combination of form and function.  

Doors offer the sleek, efficient, rugged design that is sometimes a major consideration when selecting the perfect door. The molded plastic door provides a clean and modern appearance, with white color as the standard and optional colors available,

Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.

Our standard door panels and face frames are woodless.

Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.

Our standard door panels and face casings are woodless.

Single leaf horizontal sliding manually operated door.

With a Powertron® DS Operator, the Food Pro® opens a 40” single-leaf door in just one second. A double-leaf door opens 80” a second. Its incredibly smooth and quiet operation is unmatched in the industry.

Our standard door panels and face casings are woodless.

A favorite of industry experts, Jamison’s Overhead Sliders are extremely versatile with design configurations for virtually any application.

The VersaFlex^® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components

The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components

A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.

A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.

A favorite of industry experts, Jamison’s Vertical Sliders are extremely versatile with design configurations for virtually any application.

Miniature/small version of CAC for conveyors.

The Model DCAV uses two recirculatory air curtains, creating an air vestibule between the two air streams where the air is captured and treated to a non-frost, non-fog state. 

The Model DCAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.

With the use of HCR sensors and software, Model DCAV can be integrated into a facility's refrigeration control and monitoring system.  This allows not only remote monitoring but remote adjusting of the HCR equipment.

The Model ECAV consists of two fast-acting strip doors that create a vestibule for conditioning air and an electrically or hot-gas heated anti-frost air-conditioning (AFC) section with automatic temperature control.

The ECAV is designed for medium to light-traffic freezers and high humidity situations.

The basic NPAC model is made to counteract the one-way flow-through forces caused by negative building pressure or by wind effects.

The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door.

It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control, to regulate the amount of air and heat required.

A conditioned air vestibule that uses a push-to-open versus a motorized opening.

Patent Pending

Plyfoam® Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of sizes, styles, and options.

The Plyfoam®II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.

Plyfoam®II Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of styles and options.

Smart Automatic Cooler and Freezer Doors bring down operating costs by making the doors ‘smarter’. Tests have shown that by the use of the Smart Controller, doorways are no longer being left open by employees thus enabling maximum energy savings, reduced infiltration, and improved productivity.

The strategic alliance between Tucker Auto-Mation, Boss Controls, and Jamison Door increases energy savings by equipping the sliding doors with microwave motion sensors, time delays, and / or Infrared presence sensors so the doors know when to open and when to close, hands free! Additional features include surveillance cameras and People Counting Systems.

The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door.

It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control, to regulate the amount of air and heat required.
 

Designed specifically for the needs of the retail industry. 

All steel construction door for use in high-temperature applications.

A small conditioned air vestibule with touch opening capability.

The Model CAC Air Curtain is for applications where temperatures and humidity exceed the limits of our Model AC. A heater unit is added to condition the air as it mixes inside the vestibule.

The Model CAC automatically adjusts as conditions change to optimize performance and reduce energy consumption.

With the use of HCR sensors and software, Model CAC can be integrated into a facility's refrigeration control and monitoring system.  This allows not only remote monitoring but remote adjusting of the HCR equipment.

The ThermicRoll spiraling door is a state-of-the-art door guaranteeing the best performance in terms of speed,
safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments.

The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.

Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or perforated for ventilation.

The ThermicRoll spiraling door is a state-of-the-art door guaranteeing the best performance in terms of speed,
safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments.

The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.

Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or
perforated for ventilation.